top of page
Metafoodx Logo Horizontal.png

What Is a Good Food Cost Percentage? Benchmarks for Restaurants, Hotels and Campus Dining

5 hours ago
6 min read
Chef preparing food in a commercial kitchen

A good food cost percentage for most restaurants falls somewhere between 30% and 35% of food sales, and 30% is the number quoted most often as a target. Published operating data puts the typical restaurant a little above that. In the National Restaurant Association's operations data from more than 900 restaurants, as summarized by Toast, the median full-service restaurant spent 32.0% of sales on food and nonalcoholic beverages, and the median limited-service restaurant spent 32.4%. Hotels and college dining programs price and fund food differently, so their numbers sit in different places and are measured in different ways.


So the honest answer to "what is a good food cost percentage?" is the one that fits your pricing model and stays steady when menus, guest counts and ingredient prices move. This guide covers what the published benchmarks show for restaurants, hotel food and beverage and campus dining, and why two commercial kitchens with the same percentage can be in very different shape.


What food cost percentage measures

Food cost percentage is the cost of the food you used in a period divided by the food sales from the same period. Cost of food used is usually calculated as beginning inventory plus purchases minus ending inventory. If you need the formula step by step, our guide to calculating food cost percentage walks through it, and the free food cost calculator does the math for you.


The percentage tells you how much of each sales dollar went to ingredients. It does not tell you why. A kitchen that buys well but cooks more than guests eat can post the same food cost percentage as a kitchen that pays more per case but cooks close to demand. Both numbers look the same on the P&L, and only one of them has room to improve without touching the menu price.


Is 30% food cost high?

For most full-service restaurants, 30% is at or slightly below what published data shows as typical, since the National Restaurant Association medians sit around 32%. The common 30/30/30 rule treats 30% food cost as the planning target, with labor and overhead at roughly 30% each and about 10% left as profit.


A food cost of 35% is not automatically a problem. Concepts built around premium proteins, generous portions or lower labor can run higher by design and still be profitable. A food cost of 25% is lower than the restaurant medians and can reflect strong pricing or a menu weighted toward lower-cost items. In both cases, the more useful question is whether the percentage is stable and whether you can explain each change in it.


Food cost benchmarks by segment

Restaurants. The National Restaurant Association figures above combine food and nonalcoholic beverage costs, so they run slightly higher than a food-only percentage would. They are still the most widely cited reference point for U.S. restaurants.


Hotels. Hotel food and beverage is usually tracked as a department, and banquets and catering are a large share of it. CBRE Hotels Research, which analyzes operating statements from U.S. hotels each year, reported that the hotel food cost ratio fell from 24.6% in 2010 to 22.5% in 2016 in its sample, as described by researcher Robert Mandelbaum in Lodging magazine. In its more recent analysis of 2,669 U.S. full-service, resort and convention hotels, CBRE reported that cost of goods sold made up 24.0% of food and beverage department expenses in 2025, while labor made up 59.4%, and that department profit margins reached 29.1% in the first half of 2025. Those are shares of expenses, not of revenue, so they are not directly comparable to a restaurant food cost percentage. For more on hotel numbers, see what the research shows about hotel food and beverage cost control.


College and university dining. Public benchmarks are harder to find, because the most detailed benchmarking studies are shared with association members. A few campuses publish their own figures. A 2016 University of Houston dining presentation allocated 30.1% of meal plan dollars to food cost and 33.5% to labor. Pacific Lutheran University Dining states that food it prepares on campus carries a 37% food cost. Many campus programs also track cost per meal or cost per plate, which shows changes that a percentage of meal plan revenue can hide.


Why the percentage can mislead

The first reason is price. In its October 2026 Food Price Outlook, the USDA Economic Research Service forecast that beef and veal prices would rise 8.7% in 2026 and wholesale beef 8.8%, while egg prices would fall 29.3% after rising 21.9% in 2025. A kitchen's food cost percentage can move several points with no change in how it buys, prepares or serves. We cover this in more detail in why food costs keep rising.


The second reason is yield. Food cost is calculated on what you bought, but guests are served what is left after trimming, cooking and portioning. If yields drift, the percentage rises even when purchase prices hold. Our posts on AP vs. EP cost and recipe yield explain how to check this.


The third reason is overproduction. Food that is cooked and never served is part of food cost but brings in no sales. In a demonstration project run by World Wildlife Fund and the American Hotel and Lodging Association, with support from The Rockefeller Foundation, ten U.S. hotels separated and measured their food waste over four months in 2017. In one audit described in the project's final report, an 800-person lunch event produced about two pounds of food per guest, while the average guest eats about one pound. At another property, a lunch buffet audit found that 46% of the food produced was not eaten. Food like that raises the percentage without anyone overpaying for a single case.


How to lower food cost percentage without cutting quality

Start with the items, not the total. A weekly food cost number tells you something changed, but not where. Comparing how much of each menu item was produced with how much was actually served usually shows a short list of items that account for most of the gap. Our guide to finding the five items driving your leftovers explains how to build that list.


Then plan the next service from what guests ate at similar past services, not from last week's production sheet. A kitchen production sheet that records planned, produced and leftover quantities side by side, and par levels set from real usage, make this possible by hand in a smaller operation. Check purchase specifications and yields on your highest-cost items at the same time, so that the savings from cooking closer to demand are not lost at the prep table.


Where Metafoodx fits

The Metafoodx food operations intelligence platform measures what is produced, consumed and left over for each menu item in a commercial kitchen, and uses that history to forecast demand and set production quantities. A weekly report ranks the top five high-cost overproduction items for each venue, so chefs know where a change in production will move food cost the most. At Harvest Market at UMass Amherst, overproduction fell 51.7% within three months, with more than 500% ROI from food and labor savings, according to the UMass Amherst case study. At Pomona College, overproduction fell 54% and plate costs fell 8% over nine months, according to the Pomona College case study. Results depend on each operation's starting point and how consistently the data is used.


FAQ

What is a good food cost percentage for a restaurant?

Most restaurants target 30% to 35%. National Restaurant Association data shows median food and nonalcoholic beverage costs of 32.0% of sales for full-service restaurants and 32.4% for limited-service restaurants.


Is 30% food cost high?

No. For most restaurants, 30% is at or slightly below the published medians, and it is the food cost target used in the 30/30/30 rule.


Is 25% a good food cost?

It is lower than typical restaurant medians. It can reflect strong pricing or a lower-cost menu mix. Check that portions, specifications and guest satisfaction have held steady before treating it as a target.


What food cost percentage do hotels run?

CBRE Hotels Research reported a hotel food cost ratio of 22.5% in 2016 in its U.S. sample. Hotels often report food and beverage as a department, so compare figures measured the same way.


How do you calculate food cost percentage?

Divide the cost of food used in a period (beginning inventory plus purchases minus ending inventory) by food sales for the same period, then multiply by 100.


Metafoodx is a food operations intelligence platform that captures the food journey from prep to plate, so foodservice teams can lower food cost, produce more accurately, and prevent waste before it happens. Ready to see how we can help transform your food service operation? Book a demo with our team today.

bottom of page