top of page
Metafoodx Logo Horizontal.png

Kitchen Inventory Management: FIFO, Par Levels and Inventory Turnover for Commercial Kitchens

5 minutes ago
5 min read
Shelves stocked with food products

Kitchen inventory management is the system a commercial kitchen uses to know what it has on hand, order the right amount, use older stock first, and account for every dollar of food between the receiving door and the plate. Done well, it keeps food fresh, reduces spoilage and theft, frees up cash, and produces the inventory numbers that food cost reports depend on. Done poorly, it hides losses until the month-end food cost comes in high.


This guide covers the core practices, drawing on the inventory chapter of Beth Egan's open textbook Introduction to Food Production and Service/03%3A_Managing_Procurement_and_Food_Production/3.01%3A_Managing_Inventory_Control_and_Procurement), used in Penn State's hospitality program: physical and perpetual inventory, par levels, FIFO stock rotation and inventory turnover, along with how production planning in hotels, college dining and corporate dining affects all of them.


Treat inventory as money

Egan compares managing inventory to managing a bank account. Food sitting on a shelf is cash that earns nothing, and it can spoil, lose quality or disappear. Holding inventory has real costs: storage space, refrigeration, insurance and spoilage. Ordering has costs too, in labor and delivery charges. Running out has its own cost in lost sales and unhappy guests. Good inventory management balances the three, keeping enough on hand to run every service without tying up money in stock the kitchen will not use soon.


Physical and perpetual inventory

A physical inventory is a count of everything in storage. Egan recommends doing one at least monthly, and food cost calculations depend on it, since actual food cost is beginning inventory plus purchases minus ending inventory. Our guide to actual vs. theoretical food cost explains how that number is used.


A perpetual inventory is a running balance of what is on hand, updated as product is received and issued. Most kitchens keep a perpetual inventory only for high-value items. Comparing the physical count against the perpetual record is how a kitchen spots a control problem: if the record shows more of an item than the shelf, something went missing between receiving and production.


Egan also describes ABC analysis for deciding how often to count. The most expensive items, roughly the top 20% by cost, are counted weekly or even daily, while lower-cost items are counted monthly. In most commercial kitchens, proteins fall in the first group.


Par levels and reorder points

A par level is the amount of an item the kitchen needs on hand to cover operations until the next delivery. The order quantity is the par level minus what is on hand, rounded up to full package sizes. A reorder point is the stock level that triggers an order. Par levels work best when they are set from actual usage and reviewed regularly, rather than set once and left alone. Our guide to setting par levels for a commercial kitchen covers how to calculate them, and our kitchen prep list template shows how to apply the same idea to prep.


FIFO stock rotation

FIFO stands for first in, first out. University of New Hampshire Extension's guide to stock rotation describes it as storing food so that "the older products are used or distributed before newer products." In practice, that means dating product when it arrives, placing new deliveries behind or below older stock, and using items with the closest use-by and date-marked dates first. The same guide recommends storage temperatures of 50°F to 70°F for shelf-stable food, 33°F to 41°F for refrigerated food and 0°F or below for frozen food.


FIFO matters most for perishable items and for prepared food. Ready-to-eat food made in the kitchen and held more than 24 hours has to be date marked and used within seven days under the FDA Food Code, as our guide to how long TCS food can be stored explains. A walk-in with clear labels and older containers at the front is the simplest defense against food reaching its discard date unused.


Receiving and issuing controls

Inventory control starts at the receiving door. Egan's textbook recommends checking deliveries against the purchase order for quantity, weight and quality, inspecting a sample of cases, and noting any problems on the invoice before signing it, since the signature makes the receiver responsible for discrepancies. On the other end, any transfer from storage to the kitchen should be recorded on a requisition, and access to storage should be limited, because unrecorded withdrawals make accurate records impossible.


Inventory turnover

Inventory turnover shows how quickly stock is used. Egan's textbook calculates it as the cost of food used divided by average inventory, where average inventory is beginning plus ending inventory divided by two. The textbook describes turning food inventory over about every one to two weeks, or two to three times a month, as normal. A turnover rate well below that suggests too much money is sitting on shelves, and more product is at risk of spoiling before it is used.


How production planning affects inventory

Inventory and production planning are tied together. A kitchen that overproduces uses more product than it needs, orders more to replace it, and ends up with prepared leftovers that take up walk-in space and run against the seven-day clock. A kitchen that plans production from what guests actually ate at similar past services orders closer to real usage, turns inventory faster and discards less. Our guides to overproduction in foodservice and the kitchen production sheet template cover how to plan production from consumption.


Where Metafoodx fits

The Metafoodx food operations intelligence platform measures what each commercial kitchen produces, serves and has left over by menu item, and uses that history, along with day of week, weather, events and menu cycles, to forecast demand and set production quantities. Those forecasts give purchasing teams a more accurate picture of what the kitchen will actually use, and per-item freshness alerts and leftover tracking show which prepared items are at risk of being discarded. Our guide to buying for usable cost covers how this data supports purchasing.


FAQ

What is kitchen inventory management?

The system a commercial kitchen uses to track what it has on hand, order the right quantities, rotate stock, and account for food from receiving to service.


What is FIFO in a kitchen?

First in, first out: storing and using food so that older products are used before newer ones, by dating product on arrival and placing new stock behind older stock.


How often should a commercial kitchen take inventory?

A full physical count at least monthly, with high-cost items such as proteins counted weekly or even daily.


How do you calculate inventory turnover?

Divide the cost of food used by average inventory, which is beginning plus ending inventory divided by two.


What is a par level?

The amount of an item a kitchen needs on hand to cover operations until the next delivery. The order quantity is the par level minus what is on hand.


Metafoodx is a food operations intelligence platform that captures the food journey from prep to plate, so foodservice teams can lower food cost, produce more accurately, and prevent waste before it happens. Ready to see how we can help transform your food service operation? Book a demo with our team today.

bottom of page